5/5 - (3 votes)

DP-TX350 DP-TX450 Texture / Plaster Sprayer with Peristaltic Pump

      peristaltic pump sprayer

      DP-TX350 DP-TX450TexturePlaster Sprayer peristaltic-pump

      DP-TX350 DP-TX450 is specially designedPeristaltic Pumpfor spraying texture, and also for all textured plasters, cement plaster, putty, gypsum etc with a grain size up to 3 mm, fillers and EIFS adhesives, etc.

      Specifications of DP-TX350 DP-TX450 peristaltic pumps texture spray machine:

      Model No. DP-TX350 Peristaltic Pump(without air compressor) DP-TX450 Peristaltic Pump(without air compressor), DP-TX450C with air compressor
      Voltage/frequency 220V/50Hz 220V/50Hz
      Motor power 1200W Brushless DC 1800W Brushless DC
      Max. output delivery 6L/min 8L/min
      Hopper capacity 50L 50L
      Max. grain size 3mm 3mm
      Max. pressure 55bar 55bar
      Max. delivery height 20M 30M
      N.W./G.W. 70/96kgs 72/106kgs
      Wooden Case Dimension 85*62*109cmcm 98*62*109cm

      Standard Accessories

      1pcTextureSpray Gun(with4 tips), 1pcTextureHose(10m), 1set Tool Kit, 1pc Manual

      1pcTextureSpray Gun(with4 tips), 1pcTextureHose(10m), 1set Tool Kit, 1pc Manual

      Required Airless Compressor for DP-TX350/DP-TX450: 0.9CBM/7.5KW minimum

      texture spray gun dp

      Nozzle size: 4, 6, 8, 10mm four size available for different application such asspraying texture, putty, cement plaster, white cement, gypsum, lime based coating, or gypsum plaster, stucco,textureetc. (only 2 nozzles are standard in the package)

      Thisperistaltic pump texture sprayerhas built-in air-transducer which will start the machine automatically when thespray guntrigger is pulled, and shut down the machine when the trigger is released. it will totally prolong the lifetime of the machine and get better spraying performance.

      Speed regulator and pressure regulator are available in the machine for easy adjusting.

      The sprayer use a durable plywood wooden case package.

      Thevwin ceramicsequipment use a durable peristaltic pumping tube for pumping out the heavy material liketexture, gypsum, cement plaster, etc. even the material contains the big grains up to 3mm

      The peristaltic pump use a brushless DC motor which is powerful and intelligent so as to pump the material to high spraying area.

      What’s peristaltic pump?

      Peristaltic pumpis type of displacement pump / transfer pump which is used for pumping out a variety of fluid material, it doesn’t matter it contains sands / particles or not, but it must be flowable. The peristaltic pumps are also commonly known as roller pumps. The fluid material is sucked into a flexible rubber tube which located inside a circular pump casing. A rotor with 3 “rollers”, attached to the external circumference of the rotor compresses the flexible tube. As the rotor turns, the part of the tube under compression is pinched closed thus forcing the fluid material to be pumped to move through the rubber tube. Additionally, when the tube return to its natural state after the passing of the cam (“restitution” or “resilience”) fluid flow is induced to the pump. This process is called peristalsis and is used in many biological systems such as the gastrointestinal tract. Typically, there will be 2 or 3 rollers, occluding the tube, trapping between them a body of fluid. The fluid is then transported out at high pressure, toward the pump outlet. Peristaltic pumps may run continuously, or they may be indexed through partial revolutions to deliver smaller amounts of fluid. please note the tube inside is a specially made tube, durable and constant using. of course this tube is a worn part for this pump also.

      5/5 - (3 votes)

      • Related products
      • Related posts
      • Comments
      • FAQ

      1 comment

      1. Эрик
        2017/04/24 at 11:54:29

        Добрыйдень。какаяценанаэтотаппарат Dptx450
        Сколько будет стойть доставка в Россию? Возможно ли это хотел бы наладить с вами бизнес.

      Leave your comments


      Mail (will not be published)*


      2+9=? Verification code*

      FAQ regarding our business

      Q1: What's your MOQ minimum order quantity for formal order?

      A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

      Q2: What's your payment terms?

      A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

      Q3: What is the lead time?

      A: Sample order: 3-5days, mass production 20-40 days for the formal order.

      Q4: Can we put our logo on your products? Is there extra charge for it?

      A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

      Q5: What's your warranty?

      A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

      Q6. Which port do you ship your machines?

      A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

      Q7. how can i buy your products?

      如果你是最终用户,请留下你的手机phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.


        * Your Name *

        Your Phone

        * Your Email Address *

        Your Country

        * Message *