5/5 - (2 votes)

DP-T7博士ywall Texture Sprayer With Extended Screw Pump

  • Model Number:DP-T7
  • Motor power:2.8kw
  • Motor type:brushless motor
  • Flow rate:18 liters per minute
  • Max. hose length:30m (horizonal), or 20m (height)
  • Max.pressure:30bar / 435psi
  • Package:plywood case
  • Warranty:1 year
DP-T7博士ywall Texture Sprayer With Extended Screw Pump

DP-T7Drywall Texture SprayerWith Extended Screw Pump

T7 Screw pump with compresspr

T7TextureSprayer Screw pump with compresspr

T7 Texture Paint Sprayer with Brushless Motor

T7TextureSprayer with Brushless Motor

DP-T7 With Extended Screw Pump

DP-T7TextureSprayer With Extended Screw Pump

T7 Screw Pump Texture Sprayer With 1500W Air Compressor

T7 Screw PumpTextureSprayer With 1500W Air Compressor

DP-T7 Standard Accessories

DP-T7 Standard Accessories

The DP-T7Drywall Texture Sprayer机扩展long Screw Pump which is more powerful and deliver long or higher distance, compacttexture sprayingunit equipped with Stainless steel hopper, for all textured plasters, cement plaster, putty, gypsum etc with a grain size up to 3 mm, fillers and EIFS adhesives.

Specifications of Drywall Texture Sprayer With Extended Screw Pump:

Electricity / power: 220v 50hz / 60hz
Motor output – 2.8 kw DC Brushless Motor
Max delivery rate – 18 litres per minute
Max operating pressure – 30 bar
Max grain size – 3mm
Max delivery radius – 30m (horizonal), or max.20m (height)
Hose length included in the package – 10 m
Stainless steel Hopper capacity: 40 L
Net Weight – 54 kg
Required Airless Compressor: 0.9CBM/7.5KW
Nozzle size: 4-6 – 8 – 10mm four size available for different application such as putty, cement plaster, white cement, gypsum, lime based coating,textureetc. ( 6 nozzles are standard in the package)

Features of Drywall Texture Sprayer With Screw Pump:

*Container: low weight, and easy to clean, flexible, weatherproof and resistant to ageing.
*Materials: Handing materials with a grain size up to 3 mm.
*Motor: The new powerful brushless motor achieves high torques to ensures good performance, and very low noise.
*Stainless steel bucket is optional.
*The durable screw pump could be used for 5000 – 10000 square meters fortexturematerial
*Place: suitable for use in the small commercial sector as well as for large projects.
*Thisdrywall texture sprayerequipment is ideal for putty / cement plaster / lime based plaster /texture sprayingfor indoor and outdoor wall finish.

Applicable Coatings As Below :

  • Thermal insulation composite system bonding agent(mineral and artificial systems).
  • Artificial resin plaster up to 3mm granular size.
  • Silicate plaster up to 3mm granular size.
  • Silicone resin plaster up to 3mm granular size.
  • Mineral final coats up to 3mm granular size.
  • Lightweight plaster systems up to 3mm granular size.
  • Scraped stucco up to 3mm granular size.
  • Thermal insulation plasters.
  • Restoration plaster.
  • Porous concrete coating.
  • Quartz plastic.
  • Roof coatings.
  • Fire protection coatings.
  • Mineral sealing sludges.
  • Bitumen emulsions.
  • Armoring filler.
  • Liquid wood-chip wall paper.
  • Casement grouting mortar.
  • Artificial resin rendering base.
  • Wash primer.
  • Elastic coating.
  • Acoustic plaster, artificial resin bonded.
  • Fillers, artificial resin bonded.

Related video

DP纹vwin ceramics理喷雾器机

5/5 - (2 votes)


  • Related products
  • Related posts
  • Comments
  • FAQ

Texture sprayer machine operation instructions and precautions

Read the instructions carefully before using the new machine, and prepare the protection of electric/gas/spraying operator. Before using the texture spray machine, drain the water inside the high-pressure pipe, then pour the stirred hot rub...
Read more

Leave your comments


Mail (will not be published)*


2+8=? Verification code*

FAQ regarding our business

Q1: What's your MOQ minimum order quantity for formal order?

A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

Q2: What's your payment terms?

A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

Q3: What is the lead time?

A: Sample order: 3-5days, mass production 20-40 days for the formal order.

Q4: Can we put our logo on your products? Is there extra charge for it?

A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

Q5: What's your warranty?

A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

Q6. Which port do you ship your machines?

A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

Q7. how can i buy your products?

A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.


    * Your Name *

    Your Phone

    * Your Email Address *

    Your Country

    * Message *