What is HVLP turbine paint sprayer?

TheHVLP turbine paint sprayernormally contains 3 components – turbine, hose, andspray gun, every component plays a critical role in the overall performance, that’s why turbine HVLPpaint sprayersare sold as a complete system rather than individual components. “Turbine” refers to the motor/fan assembly. The motor drives small, high-speed compression fans.HVLP turbine sprayer systemstraditionally are rated by the number of fans – called stages – attached to the motor shaft. Single stage turbines have single fan; two-stage turbines have double fans, etc. three-stage turbines have triple fans. The more stages, the higher the airflow and the higher the air pressure is at thespray gunspraying orifice. One and two-stage units are best for thin finishes. It’s more competitive price and more popular in the market. And A three-stage turbine can handle most stains, varnishes and water-based finishes, although latex will have to be thinned.

Hot air turbine hvlp sprayer system

How aThree-Stage HVLP Turbine SprayerWorks?
Air travels through the inlet into the first fan and then down the first finned baffle to the center of the second fan. The second fan then forces the air down into the second finned baffle, which directs the air to the center of the third fan where the air is finally forced out through the outlet

What’s advantage of HVLP spray gun?

HVLP spray guns have larger air passingways than high-pressure guns to accommodate the higher volume of air moving through the gun under lower pressure. Unlike high-pressure guns that use a fan-pattern knob to adjust spray, the spray pattern of HVLP guns is adjusted by moving the air cap in and out. There are three patterns adjusted by the air cap: round, horizonal fan type and vertical fan pattern.

什么材料可以HVLP涡轮喷雾器spray?

AllHVLP turbine paint sprayercups are pressurized by the air flowing into the gun, through the air tube fitting and the air pressure tube which enters the lid of the paint cup. This enables the fluid to be siphoned through the fluid pickup tube into thespray gun.HVLP paint sprayercan be used in a wide variety of painting applications. The finer atomization of HVLP systems produce smoother surface finishes. There are many paint gun models, with a variety of tip sizes to accommodate most coatings, including solvent-based paints, water based coatings, fine finish metallic coatings, high-solids polyurethane, contact adhesives, varnish, top coats, lacquer, enamel primer, latex primer, epoxy, and vinyl fluids. The manufacturers guidance should be followed in all maintenance and operating aspects, particularly when spraying high solids paints. Clogging problems can hamper painting operations if the technician is not familiar with the equipment or the application techniques required. The efficiency of this system is reduced if painting is in exposed areas.