MENU
对此帖子进行评分

如何:用无气喷雾器涂上天花板

      天花板绘画非常艰苦,容易滴水,并且难以判断您是否覆盖了所有内容。大多数画家,专业,业余等,不喜欢绘画天花板。

      这是如何使您的ceiling painting projectgo as smoothly as possible:

      步骤1:选择无气喷雾器和小费

      Most hardware stores sell handheldelectric airless sprayers或杯状喷枪, but you have to work from a ladder when using one of these unless the ceiling is unusually low, and you’ll be refilling the cup frequently. A better option is to rent a small无气喷雾器from a rental outlet or purchase a small无气喷雾器DIY类型如DP-X6。尖端调节喷雾体积和宽度。确保光圈足够宽,可以使用您使用的油漆(但不太宽),并且喷雾宽度不太狭窄,否则您会滴落。DP-X6的标准尖端尺寸为517英寸-12英寸的风扇宽度。

      Step 2: preparing the ceiling

      Before you use an无气喷雾器,涵盖您不想绘制的所有内容至关重要。与罐头喷漆不同,从无气喷雾器安顿下来时很湿。如果您不能将家具带出房间,请用塑料覆盖其每个部分。如果您只画天花板,则还应使用画家的坡度遮罩胶带在墙壁和天花板之间盖上干净的线,还应用塑料遮盖墙壁。您始终可以用遮罩纸覆盖天花板固定装置,但是将电源关闭到所有天花板灯具,将其取下并在盒子上胶带胶带胶带要干净得多。

      步骤3:绘画

      While用无气喷雾剂喷洒大表面,您应该握住约6至12英寸远的尖端。最好从一堵墙到另一堵墙进行全面扫描,但是如果您在梯子上或天花板非常大或不规则,则必须在各部分中工作。尝试通过逐渐将尖端移开以避免着色不均匀,以使喷雾在截面重叠的点上羽毛。在喷涂之前,您应该在一块纸板上测试图案,并通过调整压力设置或枪支控制,从而消除不均匀的油漆分布。

      Tips:

      DP-X6无气油漆喷雾器配枪和软管

      DP-X6Electric Airless Paint Sprayer用枪和软管

      You usually don’t have to thin paint before spraying it through an无气喷雾器, but you should if you notice low spray volume or chunks of paint material. Avoid thinning more than 20 percent, or you may have drips. It’s just as important to cover your body as it is to cover furniture, and that includes your face and hair. Many professional painters wear ski masks, goggles and a respirator. Even latex primer will gum/block your equipment if you don’t clean up properly at the end of each day. Spray solvent/water through the machine until it runs clear, andspray gun / tip / safety guard / gun filters等等需要用较软的刷子清洁。


      • 相关产品
      • 相关文章
      • Comments
      • 常问问题

      Leave your comments

      姓名*

      Mail (will not be published)*

      Country*

      2+2 =?验证码*

      常问问题regarding our business

      问题1:正式订单的最低订单订单数量是多少?

      我们的MOQ是10 - 100单位取决于模型。For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

      问题2:您的付款条款是什么?

      答:我们可以接受L/C,T/T和Paypal或Western Union,也接受针对B/L副本的付款。我们可以为我们的长期合作代表提供信用付款期限。

      Q3: What is the lead time?

      A: Sample order: 3-5days, mass production 20-40 days for the formal order.

      问题4:我们可以将徽标放在您的产品上吗?有额外的费用吗?

      A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

      Q5: What's your warranty?

      答:我们的保修是12个月有限的保修,除了易于破旧的零件。对于电动机,我们提供2年保修。

      Q6. Which port do you ship your machines?

      答:我们从中国宁波港发货。对于FOB价格,我们将承担当地的货运费和转货费用 /海关费,以及所有运输成本 /保险费用 /转发者在目的地港口 /进口税的费用...所有人都将由买方承担(或进口商)。

      Q7. how can i buy your products?

      A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.

      询问

        *Your Name *

        Your Phone

        *Your Email Address *

        你的国家

        *Message *