MENU
Rate this post

HOW TO ASSEMBLE MY X3 X6 DIY AIRLESS SPRAYER

      tools: cross point screwdriver, sharp vise, vise, allen wrench, Mobil EP0 grease, Mobil XHP 222 grease etc.

      1. sleeve coated with Mobil EP0 grease, that’s very important.
      2. installv-packing on airless sprayer piston rod
      3. install v-packing and sleeve in by using vise, and please make sure that the sleeve must be completely flat upon installed, otherwise the v-packing inside is not in correct position.
      4. install piston rod
      5. install motor /airless fluid pump/ stand together
      6. tighten nuts
      7. check gear runs smooth or not.
      8. connect ground wire
      9. install gear box cover
      10. connnect motor line / power plug line /airless pressure regulatorline etc.
      11. tighten all nuts for motor cover / front cover.

      • Related products
      • Related posts
      • Comments
      • FAQ

      如何解决DP-X3 DP-X6 Airless Paint Sprayer

      Pls follow below instructions to troubleshoot DP-X3 DP-X6 Airless Paint Sprayer. Problem Cause Solution Motor does not run: (verify sprayer is plugged in, and ON/OFF switch is on) Pressure control is set at zero pressure. Turn pres...
      Read more

      X6 Airless sprayer won’t PRIME

      There is nothing more frustrating than your airless paint sprayer not working. The paint pump is the thing that is supposed to make your job easier. However it has to draw paint and prime properly before it can work. Inlet Valve Ball (pa...
      Read more

      spare parts for X3 X6 electric airless sprayer pump

      Sparts Parts for X3/X6 Airless Paint Sprayer Parts No. Description QTY X5100a Left cover 1 X5100b Right cover 1 X5200 Front cover 1 X5300 Stand Assembly 1 X5301 Drip cup 1 X54...
      Read more

      X6 airless sprayer for PPG JONMAT Premium Contract Matt emulsion

      [embed]https://www.youtube.com/watch?v=TKXa6nol570[/embed] We tested our X6 airless paint sprayer with 519 tip size, for spraying the PPG JONMAT Premium Contract Matt Emulsion paint without water dilution, 32% volume solid. The spraying pressur...
      Read more

      Tips for Operating X-3 and X-6(H) Airless Paint Sprayers

      建议/指导操作- 3和x6 (H)无气Paint Sprayers are as below for users' reference. X-3 / X-6(H) airless paint sprayers are with OILESS DESIGN(PATENTED), no need to additionally add lubricating oil into the piston pump. Pls c...
      Read more

      HOW TO ASSEMBLE MY X3 X6 DIY AIRLESS SPRAYER

      tools: cross point screwdriver, sharp vise, vise, allen wrench, Mobil EP0 grease, Mobil XHP 222 grease etc. sleeve coated with Mobil EP0 grease, that's very important. install v-packing on airless sprayer piston rod install v-packing and s...
      Read more

      HOW TO DISASSEMBLE MY X3 AIRLESS SPRAYER

      tools: cross point screwdriver, sharp vise, allen wrench, alcohol, cotton swabs etc. unscrew the nuts in front of cover by cross point screwdriver unscrew the nuts of motor cover by cross point screwdriver unplug airless puressure regulato...
      Read more

      Leave your comments

      Name*

      Mail (will not be published)*

      Country*

      6+4=? Verification code*

      FAQ regarding our business

      Q1: What's your MOQ minimum order quantity for formal order?

      A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

      Q2: What's your payment terms?

      A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

      Q3: What is the lead time?

      A: Sample order: 3-5days, mass production 20-40 days for the formal order.

      Q4: Can we put our logo on your products? Is there extra charge for it?

      A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

      Q5: What's your warranty?

      A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

      Q6. Which port do you ship your machines?

      A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

      Q7. how can i buy your products?

      A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.

      Inquiry

        * Your Name *

        Your Phone

        * Your Email Address *

        Your Country

        * Message *