菜单
Rate this post

X6无气喷雾器不会序

      There is nothing more frustrating than your无气油漆喷雾器不起作用. The paint pump is the thing that is supposed to make your job easier. However it has to draw paint and prime properly before it can work.

      入口阀球(零件号:x6817)

      入口阀球可以使岩石捕捞器不会停止的东西得到。这将完全停止素数。修复程序 - 有两个修复程序,具体取决于导致进气球无法正确座位的严重程度。一个是,您可以在运行时简单地将流体部分的底部提供几个好的水龙头。锤子的几轮优质水龙头通常会做到。如果不这样做,您可能会从喷雾器上有一团干燥的油漆。要解决此问题,您将必须卸下进气门。这是通过去除抽吸软管,然后从流体泵上拆开的入口阀来完成的。在那里,您会发现一个球和弹簧(x6817 x6816)。这两个项目都可以通过螺丝刀去除。 Then of course a good cleaning will help you out.

      Suction tube

      如果球和座位airless sprayerare in good condition you should alsocheck the suction hose. If the suction hose has a hole in it or is not tightly secure to the无气油漆喷涂机may not be sealed and as a result may suck air in while trying to pick up material. This can lead to the system not pressurizing well. You will usually be able to tell if this is happening because you will hear the pump running rapidly but pressure will not build well.

      V包装(零件号:x6810)

      This problem is obvious because it really the only problem that happens gradually. If you have run quite a bit of paint through the system you might need to replace some common wear parts including v-packing. Having problems regularly with your pump is indicative of just some good maintenance is needed. Now this really can depend on what you are running through yourairless paint pump但是您可以在200到500加仑的油漆之间弄清楚任何地方。较厚的涂料和廉价的涂料用沉积物均可杀死V型v弹药更快。

      知道什么会导致airless paint sprayer不加重或建造压力可能是至关重要的,因为它可以帮助您弄清楚如何修复您的airless sprayerand get back to painting.


      • Related products
      • Related posts
      • 评论
      • FAQ

      如何解决DP-X3 DP-X6 Airless Paint Sprayer

      请按照下面的说明进行故障排除DP-X3 DP-X6无气油漆喷雾器。问题原因解决方案电动机不运行:(验证喷雾器已插入,开/关开关正在打开)压力控制设置为零压力。转到Pres ...
      Read more

      X6无气喷雾器不会序

      没有什么比无气油漆喷雾器无法正常工作更令人沮丧了。油漆泵应该使您的工作更轻松。但是,它必须在起作用​​之前先绘制油漆和素数。入口阀球(PA ...
      Read more

      spare parts for X3 X6 electric airless sprayer pump

      X3/X6的Sparts零件无气油漆喷雾器零件编号描述QTY X5100A左盖1 X5100B右盖1 X5200前盖1 x5300支架组件1 x5301滴水杯1 x54 ...
      Read more

      X6 airless sprayer for PPG JONMAT Premium Contract Matt emulsion

      [embed]https://www.youtube.com/watch?v=TKXa6nol570[/embed] We tested our X6 airless paint sprayer with 519 tip size, for spraying the PPG JONMAT Premium Contract Matt Emulsion paint without water dilution, 32% volume solid. The spraying pressur...
      Read more

      Tips for Operating X-3 and X-6(H) Airless Paint Sprayers

      操作X-3和X-6(H)无气油漆喷雾器的提示/指南如下,供用户参考。X-3 / X-6(H)无气油漆喷雾器具有油条设计(专利),无需在活塞泵中添加润滑油。请问...
      Read more

      HOW TO ASSEMBLE MY X3 X6 DIY AIRLESS SPRAYER

      tools: cross point screwdriver, sharp vise, vise, allen wrench, Mobil EP0 grease, Mobil XHP 222 grease etc. sleeve coated with Mobil EP0 grease, that's very important. install v-packing on airless sprayer piston rod install v-packing and s...
      Read more

      如何拆卸我的X3无气喷雾器

      tools: cross point screwdriver, sharp vise, allen wrench, alcohol, cotton swabs etc. unscrew the nuts in front of cover by cross point screwdriver unscrew the nuts of motor cover by cross point screwdriver unplug airless puressure regulato...
      Read more

      留下您的评论

      Name*

      邮件(不会出版)*

      国家*

      0+2=? Verification code*

      关于我们业务的常见问题解答

      Q1: What's your MOQ minimum order quantity for formal order?

      答:我们的订单为10-100个单位取决于模型。对于小型泵或喷枪,插入量为100。对于大容量泵,可能为10。我们可以接受1或2个单位进行样品测试顺序。

      Q2: What's your payment terms?

      A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

      Q3:领先时间是什么?

      答:样本顺序:正式订单的3-5天,质量生产20-40天。

      Q4: Can we put our logo on your products? Is there extra charge for it?

      答:是的,我们根据订单数量接受OEM订单。颜色盒包装需要额外的费用,以减少容器订单。

      Q5:您的保修是什么?

      A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

      Q6。您运送哪个端口?

      A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).

      Q7。我该如何购买您的产品?

      答:如果您是最终用户,请将您的手机号码留给我们,我们将要求我们的分销商 /经销商直接给您打电话。如果您想成为我们的分销商或代表,欢迎通过电子邮件或WhatsApp与我们联系。我们可以一一讨论更多详细信息,我们确定您会对我们的质量 /服务和价格感到满意。

      Inquiry

        * 你的名字 *

        您的手机

        * 您的电子邮件地址 *

        Your Country

        *信息*