菜单
3/5-(1票)

哪个无气喷雾器可用于Sikatop Seal-107?

      Sikatop Seal-107是胶结性的防水涂层。

      If you do not have an idea whichairless sprayer machineis better for SikaTop Seal-107, please read on.

      Product Description:

      Acement base, 2 component polymer modified waterproofing slurry. It is applied to concrete and mortar structures to prevent water infiltration.

      用途:

      Seal-107 is used for external and internal waterproofing, crack sealing,

      repair work and protection from frost and detrimental effects of de-icing agents in the

      following structures:

      • Sewage treatment facilities including concrete tanks, digestors, clarifiers etc…
      • 水处理设施。
      • Waterproofing basement and cellars. n Terraces and balconies.
      • Bridges & Sea walls.
      • Retaining walls & for sealing “hairline” cracks in concrete structures not subject to movement surfaces.
      • Swimming pools and waterproofing of drinking water tanks and reservoirs.

      Advantages:

      优势Sikatop®Seal-107提供了以下有益的特性:

      • Pre-batched components.
      • Mixed and applied easily & it can be spry applied
      • 浆料或throwele的一致性。
      • 对声音基材的良好粘附。
      • 不可渗透和防止混凝土碳酸化(80微米Sikatop®SEAL-107相当于6英寸的混凝土)。
      • Increased frost and salt resistance.
      • Non-toxic and slightly flexible.
      • Non-corrosive to steel or iron & over-paintable.

      Product Data:

      颜色 灰色,白色,米色和浅蓝色
      包装 25公斤(A+B)
      储存条件 没有霜冻和水分
      Shelf Life 12 months when unopened

      技术数据:

      化学基础 Part A: liquid (Styrene acrylic) polymer and additive

      Part B: Portland cement selected aggregate and admixtures

      密度 Comp (A+B) = 2.0 kg/I (mixed)
      抗压强度 28天后20摄氏度的30 - 40 N/mm2(迫击炮一致性)(ASTM-C-942-94)

      I.S.O. Quality assurance laboratory Results.

      抗弯强度 10 – 12 N/mm2 at 20C after 28 days (mortar consistency). (ASTM-C-580-94)
      Bond strength Approx. 2 – 3 N/mm2 after 28 days (sand blasted). (ASTM-C1042/85)

      申请详细信息:

      Mixing ratio: Slurry 1:4 by weight

      Mortar 1:4.5 by weight

      Coverage:

      根据应用程序类型,始终需要两(2)个外套。三(3)层可能

      be required in areas of extremely high infiltration.

      1st coat consumption 1-1.5 kg/m2 on damp surface.

      2日外套消费0.8 - 1 kg / m2约。

      应用混合:

      混合的一致性可以改变通过增加ing the amount of component (A) (liquid) to be used. Under normal circumstances, when the full quantities of both components are mixed together, a slurry consistency will result. For a trowelable consistency use only 90% of component (A) (approx. 4.5 kg) Mix in a clean container by slowly adding the powder component to the liquid component and stirring with slow speedmixer.

      SikaTop SeaI-107 and DP-9800G液压无气喷雾剂

      So whichDP无气油漆喷雾器is great for this coating painting?

      Our first recommendation isDP-9800G hydraulic airless paint sprayer with 243 spray tip.

      DP-9800G专业液压无气喷雾器

      DP-9800G ProfessionalHydraulic Airless Sprayer

      What’s the advantages of DP-9800G machine?

      1. DP-9800G is hydraulic+gasoline-driven airless piston pump sprayer, powerful for high viscosity coatings painting, like SikaTop Seal-107.
      2. DP-9800G is DP Upgraded hydraulic machine with DIRECT TRANSMISSION, no need belt, higher transmission and high efficiency to work.
      3. Machine with 5.5kw HONDA engine
      4. 13L液压油箱将产生更多的体积,而在加热方面会更少,这意味着更少的维护。

      除了此气体动力液压泵喷雾器外,我们还建议电气版DP-9800E。

      对于此电动液压油漆喷雾泵,我们提供了单相220V和3阶段380V的两个版本。

      we highly recommend the 380v 3 phase painting machine, because it’s more stable and more powerful.

      DP-9800E Electric Hydraulic Driven Airless Paint Sprayer

      And we offer one year warranty for all these industrial painting machines.

      Welcome to order.

      并欢迎访问我们的类别,以获取整个液压泵喷雾器,以供顶涂层防水涂层。

      //www.patriciareillygiff.com/products/hydraulic-piston-pump-airless-sprayer/


      • Related products
      • Related posts
      • 评论
      • FAQ

      1 comment

      1. 曼尼什
        2020/02/03 at 04:49:49

        如此出色的文章感谢您分享此保留发布。

        我们在印度拉贾斯坦邦的乔德布尔(Jodhpur)以低廉的价格向便携式喷砂机和磨料媒体的制造商,供应商和出口商开枪射击。

      留下您的评论

      Name*

      邮件(不会出版)*

      国家*

      9+5=? Verification code*

      关于我们业务的常见问题解答

      Q1: What's your MOQ minimum order quantity for formal order?

      答:我们的订单为10-100个单位取决于模型。对于小型泵或喷枪,插入量为100。对于大容量泵,可能为10。我们可以接受1或2个单位进行样品测试顺序。

      Q2: What's your payment terms?

      A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.

      Q3:领先时间是什么?

      答:样本顺序:正式订单的3-5天,质量生产20-40天。

      Q4: Can we put our logo on your products? Is there extra charge for it?

      答:是的,我们根据订单数量接受OEM订单。颜色盒包装需要额外的费用,以减少容器订单。

      Q5:您的保修是什么?

      A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.

      Q6。您运送哪个端口?

      答:我们从中国宁波港发货。对于FOB价格,我们将承担当地的货运费和转货费用 /海关费,以及所有运输成本 /保险费用 /转发者在目的地港口 /进口税的费用...所有人都将由买方承担(或进口商)。

      Q7。我该如何购买您的产品?

      答:如果您是最终用户,请将您的手机号码留给我们,我们将要求我们的分销商 /经销商直接给您打电话。如果您想成为我们的分销商或代表,欢迎通过电子邮件或WhatsApp与我们联系。我们可以一一讨论更多详细信息,我们确定您会对我们的质量 /服务和价格感到满意。

      Inquiry

        * 你的名字 *

        您的手机

        * 您的电子邮件地址 *

        Your Country

        * Message *