MENU
对此帖子进行评分

Airless Sprayer Anatomy

      一个无气喷雾器是由几个组件制成的,这些组件由许多各个部分制成,它们共同努力,以使绘画更容易。Airless uses high pressure, rather than air, to atomize materials so they can be sprayed on to a surface. Here we will talk about the anatomy of an无气喷雾器

      泵 /流体部分

      一个心无气油漆喷雾器是泵,也称为流体部分。这就是将要喷涂的材料(例如乳胶涂料)移动和加压的原因。无气泵通常由硬化的重型钢制成,因此它们可以创建雾化涂料和其他“可喷涂”材料所需的高压。

      马达

      可能第二重要的组件可能是电动机,即驱动泵的功率。最多无气油漆喷雾器使用电动机,然后使用燃气发动机驱动的喷雾器。DPXpro 63 Series electric paint sprayers come with a 2 years motor warranty

      驱动火车

      The motor would be useless if it is not connected to the pump. Like a transmission, and axels in a car, the drive train in an airless gets the power to where it needs to go.

      Hose

      接下来,我们需要将加压液体从喷雾器和枪支和喷雾尖到。这是specially designed painting hose with high pressurethe pump has put the fluid under.

      For an airless to work the system needs to stay pressurized so we need to hold back the fluid until we need it. We also need to be able to easily and safely turn on and off the flow at will.

      小费

      喷雾尖端控制着喷雾尺寸和流体量允许出来。因此,在绘画套件中拥有几个不同的尖端尺寸是一个好主意。

      • Controls the amount of fluid being sprayed by using different orifice (opening) sizes.
      • 孔的形状决定了喷雾图案大小 - 高度和宽度

      Pressure Control

      Since we can’t control pressure with the gun, hose or tip, we need a pressure control. There are 2 main types of pressure controls; Electronic and Mechanical Pressure Control. The benefit of electronic pressure control is the less pressure drop (up and down) for example 20bar. but normally the mechanical regulator would cause more pressure gap like 40bar.

      Chassis

      我们需要一些东西将所有这些组件放在一起!有三种常见的底盘设计配置;站立(也称为“打滑”),高男孩(有时称为“直立手推车”或“高高的购物车”“轮子”)和lo-boy(有时称为“低调推车”)。您应该熟悉的其他一些无气零件或除了主要组件之外或除了主要组件之外。但是对于便携式无气喷雾设备,它只是手工携带的类型,易于采用和易于操作。

      prime

      The switch valve that sets the无气喷雾器mode to either Prime Mode or Spray Mode.

      Rod

      流体部分的活塞部分。

      进气管

      将涂料或其他要喷涂的材料的管子抽入。

      返回管

      在泵底漆期间,将油漆返回到水桶的管。

      歧管过滤器

      The filter within the sprayer which is the first line of defense against large particles in the paint.

      枪过滤器

      枪支手柄内部的过滤器 - 防御油漆中剩余碎片的第二条防线。

      包装

      The seals in the fluid section which make the pump work.

      Like people,无气油漆喷雾器come in many shapes and sizes.

      Some of these design names are:

      • 站立(打滑)
      • Hi-Boy
      • Low-Boy

      • 相关产品
      • 相关文章
      • Comments
      • 常问问题

      Leave your comments

      姓名*

      Mail (will not be published)*

      Country*

      9+3 =?验证码*

      常问问题regarding our business

      问题1:正式订单的最低订单订单数量是多少?

      我们的MOQ是10 - 100单位取决于模型。For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.

      问题2:您的付款条款是什么?

      答:我们可以接受L/C,T/T和Paypal或Western Union,也接受针对B/L副本的付款。我们可以为我们的长期合作代表提供信用付款期限。

      Q3: What is the lead time?

      A: Sample order: 3-5days, mass production 20-40 days for the formal order.

      问题4:我们可以将徽标放在您的产品上吗?有额外的费用吗?

      A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.

      Q5: What's your warranty?

      答:我们的保修是12个月有限的保修,除了易于破旧的零件。对于电动机,我们提供2年保修。

      Q6. Which port do you ship your machines?

      答:我们从中国宁波港发货。对于FOB价格,我们将承担当地的货运费和转货费用 /海关费,以及所有运输成本 /保险费用 /转发者在目的地港口 /进口税的费用...所有人都将由买方承担(或进口商)。

      Q7. how can i buy your products?

      A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.

      询问

        *Your Name *

        Your Phone

        *Your Email Address *

        你的国家

        *Message *